Best Sellers 2x10/100/1000Base-TX to 2x1000Base-BX Bi-di TX1310/RX1550nm Single-fiber 8km Fiber Switch

Description
Tecnical Specs
Reviews

Over view:

UPONCOMM UM-GMA202-xx Series 10/100/1000M Ethernet Optical Fiber Switch with two 10/100/1000M UTP ports and two 1000M SFP sockets. The end users can use different SFP module according to his requirement, for example: 1000Base-T, 1000Base-SX, 1000Base-LX etc.

Support 10/100/1000Base-T and 1000Base-SX/LX Stardnard;
2* RJ45 ports auto 10/100/1000M;
Flow control for full duplex and half duplex;
2*SFP sockets support hot plug, all 1.25G SFP modules;
Supports Auto MDI / MDI-X function;
Broadcast storm protection;
Supporting the transmission of extra-long VLAN packets;
Supporting Quality of Service(QoS) and ensuring the transmission of VoIP packets;
Supports 10/100/1000 Base-T, 100/1000 Base-X protocol.

Key Prameter

Device Type	Unmanaged
Data Rate	10/100/1000Mbps
Wavelength	TX1310/RX1550nm
Fiber Interface	2x 1000Base-FX
UTP interface	2x 10/100/1000Base-TX
Connector	Single SC
Reach	80km
Form Factor	Stand-alone
Parameter	Specifications
Access mode	10/100/1000Mbps
Standard	IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-TX, IEEE 802.3z 1000Base-FX, IEEE802.3x Flow control
Wavelength	850nm/1310nm/1550nm
Transmission distance	Fiber Optic: depends on the SFP module; Category-5 twisted pair: 100m
Port	Two RJ45 ports: Connecting with STP/UTP category-5 twisted pairs Two optical port: LC(SFP module)
MAC address table	IK
Flow control	Full duplex: flow control; half duplex: back pressure
Power supply	AC100~240V, 50~60Hz;? DC5V 2A
Operating temperature	-10~55 ℃/td>
Operating humidity	5%~90%
Maintaining temperature	-40~70 ℃
Maintaining humidity	5% ~ 90% non-condensing
Size	1258326mm